Trimmable Protection for Kitchen & Vanity Cabinets

Protect your cabinets with the original trimmable under sink mat from Xtreme Mats, designed to fit both kitchen and vanity depth cabinets. Raised edges and patented overflow channels contain spills and messes before they cause costly water damage. Our patented one-mat design fits three standard kitchen depths or three vanity depths, making it the most versatile waterproof cabinet liner available. Made from a pure and durable rubber latex blend. This mat is easy to trim, easy to clean, and holds over a gallons of water - more than any other trimmable sink mat on the market. Ships flat for a perfect fit with no warping or folding.

Key Features

  • Fits Kitchen & Vanity Depth Cabinets – One mat trims to 3 kitchen or 3 vanity depth sizes
  • Patented Overflow Channels – Contain spills and messes before they spread
  • Holds over a gallon of Water – Industry-leading capacity for maximum cabinet protection
  • Durable, Rubber / Latex Material – Easy to clean, long-lasting performance
  • Ships Flat – Perfect fit without warping or creasing
  • Overall Dimensions: 34 1/4" x 22 1/4"

#color_beige

Perfect For Every Room: Kitchen, Bath, and Laundry

Our trimmable under sink cabinet mats can be modified to be perfectly sized for kitchen, bathroom, and laundry room cabinets. From spills to leaks, these mats provide reliable protection where it’s needed most - keeping every space clean and worry-free.

FAQs

Please read our FAQs page to find out more.

How to install your cabinet mat

Watch Our Tutorial- Click Here
To install your Xtreme Mats Under Sink Cabinet Mat, position the mat with the "Xtreme Mats" logo on the right side and place it in the cabinet. Adjust it to fit snugly to cover the area.

How to install your cabinet mat if your cabinet has plumbing

Watch Our Tutorial - Click Here
To measure and cut the Under Sink Cabinet Mat, start by measuring from the right and left sides of the cabinet to the center of the pipe, then measure from the front edge of the trim. Mark the pipe center on the mat from the top edge and adjust for accuracy by finding the midpoint if marks differ. Finally, drill a hole slightly larger than the pipe diameter at the marked center point with the mat’s front edge bent up at 90 degrees.

Did you order a water sensor? Here’s how to install it

Watch Our Tutorial - Click Here
Just place it in the designated location on the mat or anywhere leaks can happen and forget it. If water is present in the area underneath the sensor it will trigger a 110 dB alarm.

How to trim the edge of your mat for a tight fit

Watch Our Tutorial - Click Here
To trim an Xtreme Mats Under Sink Cabinet Mat for a tight fit, use a strong pair of scissors or a razor to carefully cut off the 1/4-inch edges. You can remove up to 1/2 inch from the width or depth to achieve the desired fit. Note that any modifications will not be covered by the warranty.

How to install your mat if you have a corner cabinet

If you have a corner sink base cabinet in your kitchen or bathroom, please see the diagrams below. Some corner cabinets make a 90 degree angle in the back and some are clipped; both options are shown. The best way to protect your corner sink base cabinet would be using one of the 2 options shown below. Xtreme Mats offers two cabinet mats depths. Our kitchen depth is 22 1/4" and vanity depth is 19 1/4" at their max expansion. Both kitchen and bathroom depth mats can be used in either orientation. You will need to take a look at all sizes of mats we offer and see what configuration would work best for you to protect against a plumbing leak from your valves, p-trap, garbage disposal or reverse osmosis filters.

What's covered in the lifetime warranty?

This warranty covers against normal wear and tear and guarantees that the product will not break, tear, or deform under normal usage. Owner must provide proof of purchase if purchased from a retailer, other than Xtreme Mats.

Didn’t find your answer?

Don't hestitate to contact us

x