Free Shipping On All Orders*
Club Car Precedent/Onward/Tempo Mat Installation
Club Car Models: Precedent (2004-2022), Onward/Tempo (2017-2022), Onward 6
Clip design may vary slightly by golf cart but the installation process is the same.
The Xtreme Clips work by securing the Xtreme Mat to the OEM (manufacturing) flooring under the dash. The long arm of the clip goes underneath the flooring and the small arm hooks over the color trim edge of the Xtreme Mat.
To install: Lay the mat in the cart, around the foot pedals carefully, and up under the dash. Under the dash, with the Xtreme Mat in place, pull the mat and the factory flooring slightly away from the frame of the cart. Take the short arm of the clip with the slightly hooked edge and place that against the inside lip of the colored trim. With the long arm facing away from you, toward the factory flooring, and the short arm pressed against the lip of the trim, pull the manufacturer flooring together with the Xtreme mat and swing the clip around and slide it under the manufacturing flooring and then press the flooring back down. The two mats will now be clipped together like the illustration below. You will receive 4 clips with your purchase and they can be placed anywhere under the dash where you are able to access the edge of the factory flooring to attach them.
Installing the Xtreme Mats - Golf Cart Floor Mat with an aftermarket dashboard:
- If you have an aftermarket dashboard, loosen the dash screws slightly using a T20 or T25 star bit. You will NOT need to install the Xtreme clips if your dashboard covers the top part of the mat. Retighten the screws after installation.
- Loosen the dashboard to make room for sliding the mat slightly underneath it. The dashboard should cover the top of the mat slightly, holding it in place and the sides should be tucked behind the cup holders.
- If you have an aftermarket dashboard that does not cover the top of the mat or one without cup holders on both sides, the mat may need to be secured in those places. We recommend heavy-duty adhesive Velcro dots or strips. This will secure the mat in place while also being easily removed.
INSTALLATION NOTE: We have discontinued the black plastic clips that used to be used to install this mat. All Club Car Precedent/Onward/Tempo mats can now be installed with the standard 4 pack of aluminum clips featured below in the ICON installation video. Application of the clips is the same, regardless of which cart they are on.
Maintenance and Care: To maintain the look and longevity of your mat, we recommend applying a rubber conditioner often and anytime the mat is cleaned. Mild soap should be used when cleaning to avoid stripping the natural oils of the rubber.