Free Shipping On All Orders*
Yamaha G29/Drive/Drive2 Mat Installation
The clip works by securing the Xtreme Mat to the OEM (manufacturing) flooring under the dash. The long arm of the clip goes underneath the flooring and the small arm hooks over the color trim edge of the Xtreme Mat. To install, take the short arm of the clip with the slightly hooked edge and place that against the inside lip of the colored trim.
UNDER THE DASH: With the long arm facing away toward the factory flooring and the short arm pressed against the lip of the trim, pull the manufacturer flooring together with the Xtreme mat slightly up and away from the frame/under dash area and swing the clip around and slide it under the manufacturing flooring and then press the flooring back down. You will receive 4 clips with your purchase and can place them wherever you deem necessary to further secure the mat in place.
Maintenance and Care: To maintain the look and longevity of your mat, we recommend applying a rubber conditioner often and anytime the mat is cleaned. Mild soap should be used when cleaning to avoid stripping the natural oils of the rubber.
The Yamaha mats are to be installed in the same manner as shown in the ICON installation videos shown below. Clip placement may be different but the application is the same.